Cooker Disposal

Cooker Disposal

Hob Removal and Disposal

Lifting out gas, ceramic, induction and solid plate hobs from worktops, releasing the clamps and sealant without chipping the worktop edge.

Free Cooker Disposal quote

No obligation. We only use your details to reply about this job.

Hob Removal and Disposal — Cooker Disposal

What's involved

Hobs sit in a cut-out in the worktop and are held by clamps from underneath and a bead of sealant around the rim. We first check the supply is safely isolated, as a gas hob must be capped by a Gas Safe registered engineer and an induction hob is often wired on its own high-current circuit. From the cupboard below we release the clamps, then run a blade around the edge to cut the sealant before lifting the hob straight up. Glass ceramic and induction tops are fragile, so we handle them flat and wrap them to prevent sharp shards if they are already cracked. The job takes around 15–25 minutes. The worktop opening is left clear and cleaned of old sealant, ready for your fitter. Hobs go for WEEE recycling with the glass, aluminium and copper coils recovered separately.

How we handle it

  1. Tell us about the cooker

    Use the quote form to give your postcode, the type of appliance, whether it is gas, electric or dual fuel, and whether it is still connected. A photo of the cooker and the route out is very helpful.

  2. Receive a fixed price

    We reply with a single all-in price covering carrying, transport and recycling. If the cooker needs a Gas Safe engineer or electrician to disconnect it, we will include that or tell you clearly.

  3. Make it safe

    On or before the day, the gas is capped by a Gas Safe registered engineer or the electric circuit is isolated. Clear the route from the kitchen to the door and empty the oven of trays you are keeping.

  4. Removal

    Our team protects the floor, removes shelves and doors where helpful, and carries the cooker out using a trolley. Most domestic cookers are gone in under half an hour.

  5. Recycling and records

    The cooker goes to an authorised WEEE treatment site, where metals, glass and wiring are recovered. You receive a waste transfer note confirming it was handled by a registered waste carrier.

Price guide

Cooker removal is priced on the type and weight of the appliance, how it is connected and how easy it is to reach. A disconnected freestanding cooker on the ground floor is the simplest job. Range cookers, integrated ovens and commercial equipment take more people and more time. Gas or hardwired disconnection is quoted separately and clearly.

  • Freestanding cooker, already disconnected: from £45. Standard 50–60cm gas or electric cooker with clear access, collected and recycled.
  • Commercial catering appliance: from £150. Priced after photos or a survey; depends on weight, quantity and access.
  • Gas cooker disconnection by Gas Safe engineer: £60–£95. Supply capped off and made safe before the appliance is moved.

Questions about hob removal and disposal

How much does cooker removal cost?

Collecting a freestanding cooker that is already disconnected typically starts from around £45. Built-in ovens cost from about £55, and range cookers usually cost £90–£160 because they need more people. If a Gas Safe engineer is needed to cap off the gas, expect to add roughly £60–£95. Commercial equipment is priced after reviewing photos.

Get a free cooker disposal quote

Tell us what you need and we'll come back with a clear price.

Request a quote